HC10 Series intellectual Programmable Logic controller, the maximum nu...
MONT70 Elevator Integrated Controller
MONT70 series products are the Intelligent Control System with Automatic control technology, Power electronic technology, Motor drive technology and Network communication technology. On the international advanced level, MONT70 can be perfectly capable of various elevator systems.
1 phase 200 - 240V……2.2 - 3.7kW
3 phase 200 - 240V……3.7 - 30kW
3 phase 380 - 460V……5.5 - 45kW
Direct stop technology
Based on the distance control, the direct stop technology realizes smooth speed curve and high operating efficiency.
The elevator operation can automatically generate N curves and achieve high efficiency even no setting elevator speed parameters.
Full communication signal transmission
Integrate the CAN, the Modbus and other communication technologies.
Support the debugging via Bluetooth phones
Automatic identification grid voltage technology
Automatically correct the operation curve in accordance with the input grid voltage.
Multiple functions
Can flexibly set the elevator control functions up to 54 kinds.
The I/O terminal functions of the main control board, the car top board, and the main/vice manipulator command boards, can be flexibly set.
The high and the low levels of main control board input terminal are selectable.
Convenient car debug mode
In the car, you can connect the panel to the network communication port of car internal call board via the cable, and then you can debug the elevator and monitor its running state.
Two cables can make two elevators in parallel
Onboard small panel design
Design with three digital tubes and three keys.
Can display the fault, floors and other information, fault reset, shaft self-learning, call elevator and other operations.
Make easier for debugging and maintaining the elevator.
All operations of product by one panel
All operations of the product can be achieved by an optional external panel, including main control board, car top board, hall call board, and door controllers.
Flexible installation
The main control board can be installed on other locations.
Ultrathin structure
This design is more space-saving installation.
Perfect protection for fault
Quick positioning method for fault based on fault subcode.
60 kinds of faults sub-level treatments.
Immediately locking the base electrode and switching off IGBT output at fault can avoid contactor arcing, which can ensure the elevator safe and reliable operation.
The cosine encoder wiring mode and encoder disconnection can be identified automatically.
Three high voltage inputs of 110 - 220V AC/DC
The main control board has three programm-able high voltage inputs of 110 - 220V AC/DC, which can reduce the system cost.
-
1970-01-01
-
1970-01-01
Related products
