HC10 Series intellectual Programmable Logic controller, the maximum nu...
解決方案
HD50 applies to coating machine
1 Foreword
With the development of processing technology for paper and plastic packaging and the updating of coating processing equipment, the tension detection and control of paper or plastic during the coating production process is an important technical measure which can improve product quality and output.
The coating machine is a device that coats raw materials (paper, cloth, plastic, etc.) with an optional coating (adhesive, ink, etc.), and then dries and winds up. In the whole process, it is divided into several processes of unwinding, intermediate multi-level synchronization control and winding. It is required that the paper tension is constant during the work, that is, the linear velocity is constant.
Technical requirements
1. Raw materials must maintain constant tension during unwinding and rewinding
2. When unwinding and winding, regardless of the change in the roll diameter, a smooth and consistent line speed must be maintained.
3. Unwinding control, intermediate multi-stage synchronous control, and winding control speed must be synchronized to avoid the raw materials being too loose or too tight, or even being pulled up.
2 Introduction of HD50
The modular and custom design of the HD50 series features excellent open-loop vector and closed-loop vector control for three-phase AC asynchronous motors and three-phase AC synchronous motor control.
HD50 are high-performance vector control AC drive which
The HD50 series has built-in extended function interface and multiple encoder interfaces, which can realize speed control, torque control, constant tension control and servo positioning control. It can meet the requirements of crane machinery, printing machinery, high-end machine tool in many fields such as various kinds of complex high precision drive, and provide comprehensive solutions for the equipment manufacturing industry.
Features of HD50
1. Unique tension control function, multiple selection of tension control, built-in automatic calculation module of reel diameter, advanced inertia compensation algorithm, flexible taper adjustment, and automatic detection for belt-broken.
2. Various torque references, Flexible adjustment between the torque control and the speed control.
3. Higher performance VC control, speed control accuracy: ±0.05%, speed control range: 1:1000, torque control response:<50ms, start torque: 180% rated torque /0Hz.
4. Due to the excellent current and voltage control algorithm and the advanced overcurrent suppression, the inverters will run without overcurrent and tripping under any acceleration/ deceleration time and any impact load conditions.
5. By setting the parameters, can simply control to drive the asynchronous motor and the synchronous motor.
6. Simple servo function, servo positioning and spindle orientation
Application
Scheme 1 Torque control mode: As the required force of the diameter of the coil is different, inertia compensation algorithm automatically adjusts to keep the linear velocity constant.
Scheme 2 Roll diameter calculation mode: According to the parameters such as coil diameter and material thickness, built-in automatic calculation module of reel diameter adjusts to keep the linear velocity constant.
Scheme 3 PID feedback mode: Adjust the speed difference by pulse PID feedback to keep the linear velocity constant.
This case adopts scheme 3, and the application site is a factory in Shenzhen Guangming New District. The debugging process and effect of the winding inverter are as follows:
4.1 Debugging process
(1) Wiring according to Figure 1;
(2) Setting the motor parameters according to the motor nameplate;
(3) Disconnect the motor load, use the jog (JOG) function to determine the motor rotation direction, and change the wiring to rotate in the forward direction;
(4) Perform self-tuning of motor parameters;
(5) Setting the maximum output frequency and the upper limit frequency;
(6) Setting the command given channel and frequency given channel;
(7) Setting the acceleration and deceleration time;
(8) Setting the terminal function;
4.2 The wiring of control signal
The wiring of control signal is shown in Figure 1, where AI1 is frequency reference, DI1 is forward rotation, DI3 is reverse rotation, and DI6 is pulse PID feedback input.
4.3 Final parameter setting
4.4 Actual results
According to the field test, when the winding volume is about 600m, the change of the winding diameter is small, the PID pulse feedback amount is small, the winding is smooth, and the coating is uniform. When the winding volume is from 600m to 1200m, the change of the winding diameter is big. The speed is adjusted in time by the PID pulse feedback to keep the linear velocity constant, and then a good coating effect is obtained. The work has increased the efficiency by more than 20% in the original traditional way, reduced the dependence on the skill of the operator and improved the degree of automation. And also it has been highly praised by the users.
4.5 Debugging Precautions
1. It is necessary to obtain the motor parameters accurately, so it is necessary to input the motor nameplate value correctly and perform motor parameter self-tuning.
2. Need low-frequency starting torque, just set F09.07 to 0 (automatic torque boost) to meet the requirements.
5 Summary
HD50 High-peformance Vector Control AC Drive has been successfully applied in the field of packaging machinery, its superior performance (low frequency torque, wide speed range, high steady-state accuracy, flexible operation, comprehension functional protection), a variety of control solutions and its high reliability have been fully verified and fully meets the coating machine process control requirements.
